Resources

My Account

FAQ

Downloads

●SpectroTECH® Device Modules - Clock Speed
From this page you can find various firmware HEX download files. These files are only required if you require your SpectroTECH® device module to run at a faster clock speed. From the factory most smart device modules run at 8Mhz using the MCU's internal oscillator and perform very well. If you must have the device module run at faster rate then you only need to re-program the device with one of the appropriate HEX files below.
These firmware versions ONLY work when using the SpectroCLK® card, as it is this card that provides the clock source to the device modules. Please be sure to use the correct version of firmware ensuring that the firmware speed is matched to the speed of your SpectroCLK®, 4,8,12,16 or 20Mhz personality card. Please see the device's user manual for more information.

●Your Custom Device Module - PCB Artwork
You can also download PCB artwork for SpectroPRO1® and SpectroPRO2® foot-prints that can be used in ExpressPCB. This is ideal for those users that would like to build custom device modules compatible with SpectroBUS®.

●Your Custom Device Module - Sales
Additionally, if you have built a device module compatible with SpectroBUS® and you would like to sell it on our website, please contact our sales department for more information.

SpectroTECH Part	Revision	Description	Firmware file	Document file
SpectroLCD	1.2	SpectroLCD firmware for using SpectroCLK running at 4MHz	SpectroLCD0412.HEX	SpectroLCDFI_EC.PDF
SpectroLCD	1.2	SpectroLCD firmware for using SpectroCLK running at 8MHz	SpectroLCD0812.HEX	SpectroLCDFI_EC.PDF
SpectroLCD	1.2	SpectroLCD firmware for using SpectroCLK running at 12MHz	SpectroLCD1212.HEX	SpectroLCDFI_EC.PDF
SpectroLCD	1.2	SpectroLCD firmware for using SpectroCLK running at 16MHz	SpectroLCD1612.HEX	SpectroLCDFI_EC.PDF
SpectroLCD	1.2	SpectroLCD firmware for using SpectroCLK running at 20MHz	SpectroLCD2012.HEX	SpectroLCDFI_EC.PDF
SpectroLCD	1.2	SpectroLCD original firmware as shipped from factory using internal 8MHz oscillator	SpectroLCDIO12.HEX	SpectroLCDFI_IO.PDF

SpectroKEY	1.2	SpectroKEY firmware for using SpectroCLK running at 4MHz	SpectroKEY0412.HEX	SpectroKEYFI_EC.PDF
SpectroKEY	1.2	SpectroKEY firmware for using SpectroCLK running at 8MHz	SpectroKEY0812.HEX	SpectroKEYFI_EC.PDF
SpectroKEY	1.2	SpectroKEY firmware for using SpectroCLK running at 12MHz	SpectroKEY1212.HEX	SpectroKEYFI_EC.PDF
SpectroKEY	1.2	SpectroKEY firmware for using SpectroCLK running at 16MHz	SpectroKEY1612.HEX	SpectroKEYFI_EC.PDF
SpectroKEY	1.2	SpectroKEY firmware for using SpectroCLK running at 20MHz	SpectroKEY2012.HEX	SpectroKEYFI_EC.PDF
SpectroKEY	1.2	SpectroKEY original firmware as shipped from factory using internal 8MHz oscillator	SpectroKEYIO12.HEX	SpectroKEYFI_IO.pdf

SpectroCOM	1.2	SpectroCOM firmware for using SpectroCLK running at 4MHz	SpectroCOM0412.HEX	SpectroCOMFI_EC.PDF
SpectroCOM	1.2	SpectroCOM firmware for using SpectroCLK running at 8MHz	SpectroCOM0812.HEX	SpectroCOMFI_EC.PDF
SpectroCOM	1.2	SpectroCOM firmware for using SpectroCLK running at 12MHz	SpectroCOM1212.HEX	SpectroCOMFI_EC.PDF
SpectroCOM	1.2	SpectroCOM firmware for using SpectroCLK running at 16MHz	SpectroCOM1612.HEX	SpectroCOMFI_EC.PDF
SpectroCOM	1.2	SpectroCOM firmware for using SpectroCLK running at 20MHz	SpectroCOM2012.HEX	SpectroCOMFI_EC.PDF
SpectroCOM	1.2	SpectroCOM original firmware as shipped from factory using internal 8MHz oscillator	SpectroCOMIO12.HEX	SpectroCOMFI_IO.pdf

SpectroPRO1	1.2	ExpressPCB Schematic & PCB artwork for your own custom single slot board design. Please see the Links to other web sites for ExpressPCB.	SpectroPRO1UD.ZIP	SpectroPRO1UD.PDF
SpectroPRO2	1.2	ExpressPCB Schematic & PCB artwork for your own custom dual slot board design. Please see the Links to other web sites for ExpressPCB.	SpectroPRO2UD.ZIP	SpectroPRO2UD.PDF