Using an adapter board specifically designed for commercially available LCD's makes connecting a liquid crystal display with SpectroLCD simple. These boards have been designed to facilitate the connection of most text LCD types using one of four terminal layouts, and will work for displays with or without a back light. Please see Figures 2 and 3 in the SpectroLCD user manual for the LCD display connection diagram and additional information on LCD connections.

Features:

• Connect with: 14 or 16 pin single row located at the TOP of the LCD with .100 Pin Centers.
• Connect with: 14 or 16 pin single row located at the BOTTOM of the LCD with .100 Pin Centers.

Please see the SpectroLCD User Manualfor more information.

Price: $7.00

Using an adapter board specifically designed for commercially available LCD's makes connecting a liquid crystal display with SpectroLCD simple. These boards have been designed to facilitate the connection of most text LCD types using one of four terminal layouts, and will work for displays with or without a back light. Please see Figures 2 and 3 in the SpectroLCD user manual for the LCD display connection diagram and additional information on LCD connections.

Features:

• Connect with: 14 pin (2 x 7 double row located on the LEFT SIDE of the LCD with .100 Pin Centers.
• Connect with: 16 pin (2 x 8) double row located on the LEFT SIDE of the LCD with .100 Pin Centers.

Please see the SpectroLCD User Manualfor more information.

Price: $7.00

This is the standard ribbon cable used to connect SpectroLCD with the available LCD Adapter boards. The ribbon cable is 8 inches long and has two IDC connectors that connect with the 2mm male sockets provided on the adapter boards and SpectroLCD

Using an adapter board specifically designed for commercially available keypads makes connecting a keypad with SpectroKEY simple. Adapter boards are available that allows the connection of various standard keypads, or any custom keypad with up to sixteen switches. See Figure 4 through 10 of the SpectroKEY user manual for specific connection diagrams and additional information on Keypad types and connections.

Features:

• Connect with: PACTEC PN-70553D (4 Col x 4 Row) 16 switch keypad.
• Connect with: PACTEC PN-70554C (3 Col x 4 Row) 12 switch keypad.
• Any custom matrix keypad configuration with one to sixteen switches.

Please see the SpectroKEY User Manualfor more information.

Price: $6.00

Using an adapter board specifically designed for commercially available keypads makes connecting a keypad with SpectroKEY simple. Adapter boards are available that allows the connection of various standard keypads, or any custom keypad with up to sixteen switches. See Figure 4 through 10 of the SpectroKEY user manual for specific connection diagrams and additional information on Keypad types and connections.

Features:

• Connect with: JAMECO 169244 (4 Col x 4 Row) 16 switch keypad.
• Connect with: CIRCUIT SPECLALIST KITA1 (3 Col x 4 Row) 12 switch keypad.
• Connect with: Digi-Key GH5001 (3 Col x 4 Row) 12 switch keypad.
• Connect with: Digi-Key GH5010 (4 Col x 4 Row) 16 switch keypad.
• Any custom matrix keypad configuration with one to sixteen switches.

Please see the SpectroKEY User Manualfor more information.

Price: $6.00

This is the standard ribbon cable used to connect SpectroKEY with the available Keypad Adapter boards. The ribbon cable is 8 inches long and has two IDC connectors that connect with the 2mm male sockets provided on the adapter boards and SpectroKEY.

AC power adapter for the SpectroBUS18 development system. Input: 120 volt AC, 60Hz (for use in North America only) Output: 12 volt DC 300mA

This cable is 6 foot long with a 9-pin male connector used to connect to your computer, a 5-pin female connector that is compatible with SpectroCOM. Typically a PC requires a female DB9, please check your PC before ordering, or you can use a gender changer to convert from a Male DB9 to a Female DB9.